Smart Home & Video Doorbell Installation in Kent

Why wired beats battery

Smart devices are only as good as the power behind them. A battery video doorbell that needs charging every few weeks, or a camera that dies in cold weather, quickly stops being convenient. A properly wired device, fed from a real supply, just works, all year, with nothing to recharge. We install smart home devices and video doorbells across Kent, with the power side done properly.

Most of what we fit comes down to giving a smart device a reliable, tidy supply: the right transformer for a doorbell, a fused spur for a hub, or the correct switch for smart lighting.

Video doorbells and transformers

Wired video doorbells need a transformer that delivers the right voltage and power for the model. Many homes have an old doorbell transformer that’s the wrong rating for a modern video unit, which leads to dropouts, poor video, or a doorbell that won’t charge its internal battery.

We supply and fit the correct transformer and a tidy wired connection, so the doorbell has a constant supply and works reliably rather than fighting for power. Where there’s no existing doorbell wiring, we run a neat supply to the door.

Smart switches and the neutral question

Smart light switches are popular, but many need a neutral conductor at the switch position, and older switch drops often don’t have one. Whether a particular smart switch will work comes down to what’s behind your faceplate.

We check before fitting and advise honestly: some setups are straightforward, some need a different switch or a small wiring change, and we’ll tell you which yours is rather than leaving you with a device that won’t commission. See also light switches and dimmers.

Power for cameras, hubs, and panels

Smart homes accumulate gadgets that all need power: a hub by the router, cameras around the eaves, a panel in the hall, sensors here and there. Done piecemeal, that’s a tangle of plug-in adaptors. Done properly, it’s tidy fused supplies in the right places.

We add fused spurs and supplies for hubs and panels, and weatherproof outdoor power for cameras and sensors, so the system is reliable and there are no chargers dangling off sockets.

How a smart install runs

Tell us the device and where it’s going. We confirm the supply, transformer, or neutral it needs, install and connect it on a tidy, fused supply, then test it and help with the first setup so it’s working before we leave.

It’s all quoted up front, and we’re happy to do a single doorbell or a whole set of devices.

Related work

For smart lighting control specifically, see light switches and dimmers. For outdoor power for cameras see outdoor sockets, and for wider work see domestic electrical. To book, get in touch with the device you have in mind.