From the historic streets to the newer estates, CJA Electrical covers electrical work of every size across Strood. Most enquiries are EICRs and landlord compliance, fault-finding when the power keeps tripping, or older consumer units that are due for replacement, but no job is too small. We’re around 8 minutes from our Rochester base, work to a fixed quote, and leave the place as tidy as we found it.

What an electrician in Strood covers

In Strood we cover both ends of the scale. At one end, the compliance work: EICRs, landlord certificates, and fixed-wire testing for commercial units. At the other, the small but important jobs: a single extra socket, a faulty light circuit, a replacement consumer unit, a couple of outdoor floodlights. In between sit the mid-size projects: rewires, kitchen and bathroom circuits, and alarm upgrades. One electrician, one point of contact, and a quote agreed up front on all of it.

The properties we work on in Strood

Strood has a healthy mix of Victorian terraces and post-war housing, plus newer development along the riverfront. Rented stock in the older terraces is the most common reason for a landlord EICR booking. Across Strood that means no two inspections look quite the same. The common threads in the older stock are missing RCD protection, lighting circuits without an earth, and consumer units that have done their time. In the newer estates it’s more about surge protection and tidy remedials. Either way, the report explains what was found in plain English and what, if anything, actually needs doing.

Multi-occupancy meter cupboard with separate consumer units and smart meters
Multi-occupancy meter cupboard with separate consumer units and smart meters

Common electrical work in Medway

A typical run of Medway jobs covers consumer unit changes, fault-finding, socket and lighting additions, and alarm work. Faults are the unpredictable ones (a circuit that won’t reset, a socket that’s stopped working, a persistent tripping problem) and we’ll triage those on the phone first, since sometimes the answer saves you a callout entirely. The planned work, from a single socket to a rewire, is always priced before it starts.

EICRs and landlord compliance in Strood

For Strood landlords, the EICR is the single most important piece of paperwork. Since June 2020 every rented home in England has needed one at least every five years, and at the start of any new tenancy. Medway Council enforces it and can fine up to £30,000. Beyond the EICR, rented properties also need working smoke alarms on every storey, and HMOs often need emergency lighting in the common parts, both of which we can supply and certify on the same visit where it makes sense.

Smaller domestic consumer unit with each circuit clearly labelled
Smaller domestic consumer unit with each circuit clearly labelled

Why Strood property owners choose CJA Electrical

For Strood work the advantages are practical ones. A single point of contact who knows your property. Fixed quotes agreed before anything starts. Reports back within 48 hours. Tidy work and a clean finish. And honest advice: we’d rather tell you a job can wait, or that a phone call will fix it, than charge for something you don’t need. That approach is why much of the work comes through word of mouth around Rochester, Chatham, Higham.

How a job runs

Getting work done in Strood doesn’t need to be complicated. One message with the address and a description, one fixed quote, one appointment at a convenient time, one tidy finish. For inspections, one PDF report within 48 hours of testing. If anything needs putting right, you get an itemised quote and the freedom to decide. Same electrician throughout, so nothing falls through the cracks between the quote and the work.

Credentials, insurance and how we work

The credentials behind the work: City & Guilds 2391 (inspection and testing), 2382 (18th Edition wiring regulations), and the 2365 electrical installation diploma, backed by £1 million public liability and £100,000 professional indemnity insurance. All inspections are carried out and coded against BS 7671, the UK wiring standard. Just as important is the decade of domestic experience across the Medway area. Qualifications get you in the door, but local know-how is what makes the quotes accurate.

Our Strood services

From our Rochester base, Strood is around 8 minutes away. We cover the full range of domestic electrical work in the town:

Nearby

We also cover:

Frequently asked questions

How quickly can you come out for an emergency in Strood?

Same-day where the diary allows. Call or WhatsApp with what's happening and we'll triage it on the phone first. Sometimes it's something you can safely reset yourself, which saves you a callout. If a visit is needed, we'll give you an honest idea of timing and a price before setting off. Outside working hours it's best-effort rather than a guaranteed 24-hour service.

How much does an EICR cost in Strood?

EICR cost depends on the size of the property and the number of circuits. Most three-bedroom Strood homes are quoted as a fixed price after a short chat about the property; a photo of the consumer unit often helps. The written report follows within 48 hours of testing, and any remedial work is quoted separately so you can decide how to proceed.

Do I legally need an EICR on my Strood rental?

Yes. Since June 2020, every privately rented home in England needs a satisfactory EICR at least every five years and at the start of any new tenancy. The certificate must be supplied to tenants and to Medway Council on request, and penalties for non-compliance run to £30,000. We supply the report in the standard format your agent or council will accept.

What does an EICR actually check?

An EICR is both a visual inspection and an electrical test. The consumer unit is opened and inspected, every accessible socket, switch and light fitting is checked, and every circuit gets dead and live testing: continuity, insulation resistance, polarity, earth fault loop, and RCD operation. The result is a written report with each observation coded against BS 7671.

What do C1, C2 and C3 mean on my report?

They're observation codes. C1 means immediate danger and needs sorting straight away. C2 means potentially dangerous and also fails the report. C3 is "improvement recommended" and does not fail it. A report is satisfactory with no C1 or C2 items; C3s alone still pass. We'll always explain in plain English what any code means for your Strood property.

Get a quote

Send a quick message and you'll get a same-day reply during working hours. Skip straight to phone or WhatsApp if you prefer.

EICR detail (helps with the quote)

Or skip the form: Office 01634 907123 Mobile 07598 216512 WhatsApp info@cjaelectrical.co.uk