EICR in Strood

CJA Electrical does EICR testing across Strood and the wider Medway area: landlords ahead of a new tenancy or a 5-yearly recheck, homeowners buying or selling or just due an inspection, and anyone who’s noticed warm sockets, frequent tripping, or a burning smell they can’t explain. Strood sits within the 8-minute working radius of our Rochester base, so site visits are tight to the diary and reports come back inside 48 hours.

What EICR actually is

An EICR is a formal inspection and test of the fixed wiring in a property: the consumer unit, every circuit running off it, every accessible socket, switch, and light fitting. The output is a written report with observation codes against anything that’s not satisfactory: C1 for immediate danger, C2 for potentially dangerous (also a fail), C3 for improvement recommended, FI for further investigation required. A satisfactory report has no C1 or C2 observations. A property with C3 observations alone still passes. The report is what landlords need for the PRS regulations, what surveyors check on sale, and what insurers reference when validating a claim.

When you need EICR in Strood

Different reasons for different property types. Rented property in Strood runs on the 2020 PRS regulations: five years between inspections, plus a fresh report at the start of each new tenancy. The certificate is supplied to tenants and to the local authority on request. Owner-occupied property doesn’t have a statutory cycle. IET guidance is 10 years for domestic, but plenty of homeowners inspect more frequently, usually around major life events like buying, selling, or renovating. Insurance renewals also trigger it, especially on older properties or where there’s been a previous claim.

Standards and what compliance looks like

BS 7671:2018+A2:2022 is the technical reference behind every EICR. The standard sets out what gets inspected, what gets tested, what tolerances apply to each measurement, and how observations are coded. The 2022 amendment introduced changes around surge protection (now required on most domestic installations), arc fault detection in some circumstances, and updated requirements for outdoor and EV charging circuits. Older installations being inspected today are tested to current standards. That doesn’t mean every pre-2022 installation needs rewiring. Observations are coded based on whether the departure from current standards represents an actual safety issue. A consumer unit pre-dating the 2022 amendment that’s otherwise sound is typically a C3 (improvement recommended) rather than a C2 (potentially dangerous).

Fittings and where they go

What gets inspected: the consumer unit (the main fuse board) is opened up and inspected with the cover off. We check the main earth and bonding, the protective devices (MCBs, RCDs, RCBOs), the labelling, and the condition of the connections. From there we work through every accessible accessory in the property (sockets, switches, light fittings, immersion isolators, cooker outlets), checking each for damage, wear, and correct fitting. Cable routing is checked where it’s accessible. Loft spaces, under-stair cupboards, airing cupboards, and outbuildings get a visual where reachable. Buried cables behind plaster are not opened up, but the live testing picks up any major issues on those circuits via insulation resistance and earth fault loop measurements.

Testing schedule and remedials

All testing uses calibrated multifunction test equipment: insulation resistance, earth fault loop impedance, RCD operation, and continuity all measured against the BS 7671 pass criteria for each test. Calibration certificates are available on request; the equipment is calibrated annually to UKAS standards. On site, the work runs circuit by circuit. Each is isolated, dead-tested, restored, and live-tested before moving on. The customer is kept informed of what’s being tested and any brief power-downs are flagged in advance. Our standard practice is to leave the consumer unit and accessories exactly as we found them once testing is complete.

Why Strood property owners book CJA Electrical

Most of the EICR work that comes through CJA Electrical in Strood is repeat business or referrals: landlords on the 5-yearly cycle, agents who’ve used us across multiple portfolios, homeowners coming back at sale or purchase, and word-of-mouth from other tradespeople in the area. Word-of- mouth in a town this size builds the reputation steadily and the work is done by someone with that reputation to protect. The practical benefits: same-day quotes, certificates inside 48 hours, transparent pricing on remedials, and the person on site is the person signing the report. No subcontracting, no portal handovers, no chasing up.

How the work runs

Step one, quick chat about the property: how many bedrooms, rough age of the consumer unit, any known issues, any access constraints (tenanted property, occupied during works, working hours preferences). Most quotes are confirmed on that initial call as a fixed price, with larger or unusual properties going to a brief site visit before the quote firms up. Step two, testing visit. Half a day to a full day on site for most domestic property; longer for larger or multi-installation premises. Brief power-downs during dead testing flagged in advance. Step three, the report. PDF inside 48 hours, formatted to BS 7671 Appendix 6, with the schedule of test results, schedule of inspections, and observations all in the standard format insurers and agents expect to see.

What affects the price

The two factors that move Strood EICR pricing are circuit count (more circuits = more testing time) and complexity (multiple consumer units, outbuildings, three-phase supplies on commercial property). For straightforward domestic property, the price band is well-established and quoted up-front. What we don’t do: deposits, hidden fees, or surprise charges on the day. The fixed price is what you pay, invoiced on completion. Remedials are separate so the EICR price is the EICR price.

FAQs

Can the report be supplied to my agent or council directly?

Yes. The PDF can go to you, your letting agent, your council, your insurer, or all of the above. Medway Council accepts the standard BS 7671 Appendix 6 format, as do all the major letting agents and managing agents we’ve worked with.

How long does an EICR take?

Half a day for a typical Strood three-bed home. Smaller flats can be done in a couple of hours; larger properties with multiple consumer units or extensive outbuildings can take a full day. We give a realistic estimate at quoting stage based on circuit count and access.

Do I need to be present during the inspection?

For owner-occupied property, ideally yes. There’ll be brief power-downs as each circuit is tested, and someone needs to be aware in case sensitive equipment needs warning. For tenanted property, tenant access can be arranged via the letting agent or directly with the tenant; landlord attendance isn’t necessary.

What’s the difference between a Satisfactory and Unsatisfactory report?

A satisfactory report has no C1 (immediate danger) or C2 (potentially dangerous) observations. C3 observations (improvement recommended) on their own don’t fail the report. An unsatisfactory report means C1 or C2 observations are present and the installation needs remedial work to bring it back to compliance.

Can you do remedial work on the same visit?

Sometimes. Minor remedials (replacing a damaged socket face, tightening a loose connection, fitting a missing blanking plate) can be done on the inspection visit if time and parts allow. Larger remedial work (consumer unit replacement, recircuiting, additional RCD protection) is quoted separately and scheduled as a follow-up.

Will the inspection damage anything?

No. The tests are non-destructive. Insulation resistance and earth fault loop are low-current measurements that don’t stress the installation. Most of the on-site work is visual inspection plus brief electrical testing on each circuit. The only disruption is the short power-downs during dead testing.