CJA Electrical is an established electrician serving Ditton and the neighbouring Maidstone towns of Larkfield, Aylesford, Maidstone. The work splits between compliance (EICRs and landlord safety certificates) and everyday domestic jobs like consumer unit upgrades, additional circuits, lighting, and alarms. Being around 28 minutes from our Rochester base keeps response times short for both booked visits and the occasional same-day emergency.

What an electrician in Ditton covers

The full domestic range is available in Ditton: electrical installation condition reports, landlord safety certificates, emergency callouts, consumer unit (fuse board) upgrades, rewires and partial rewires, extra sockets and lighting points, smoke and heat alarms wired to BS 5839-6, and outdoor lighting and power. Commercial EICRs and fixed-wire testing are covered too, for offices, shops and small workshops in the area. Every job is quoted as a fixed price after a short conversation about the property.

The properties we work on in Ditton

Ditton’s residential stock is largely post-war estate housing with some older village property near the centre. EICRs here often find consumer units that need upgrading. We see the full spread of Ditton property, from period homes near the town centre to the estates on the edge of town. That range is exactly why a fixed quote after a quick chat beats a one-size-fits-all price: a tidy modern flat and a rambling older house are very different jobs, and you should only pay for the work yours actually needs.

Multi-occupancy meter cupboard with separate consumer units and smart meters
Multi-occupancy meter cupboard with separate consumer units and smart meters

Common electrical work in Maidstone

Some jobs come up again and again across Maidstone. Consumer unit replacements are top of the list, older split-load and rewireable boards swapped for a modern unit with RCD protection on every circuit. Close behind are dead sockets and circuits that keep tripping, extra socket outlets where a room has too few, and lighting changes from old fittings to LED. Smoke and heat alarm upgrades and the occasional outdoor circuit round out a typical week.

EICRs and landlord compliance in Ditton

Landlord compliance is the core of what we do in Ditton. The 2020 PRS regulations require a satisfactory EICR every five years and before each new tenancy, with the certificate supplied to tenants and to Tonbridge and Malling Borough Council on request. Penalties for going without run to £30,000. We work directly with you or your letting agent to arrange tenant access, turn the report around inside 48 hours, and, if anything fails, quote the remedials clearly so there’s a straightforward path back to a satisfactory certificate.

Multifunction tester measuring end-to-end resistance on a ring final circuit
Multifunction tester measuring end-to-end resistance on a ring final circuit

Why Ditton property owners choose CJA Electrical

CJA Electrical keeps it personal in Ditton. No call centre, no rotating cast of subcontractors, just one electrician who quotes, books and does the job, and stands behind the report at the end. Fully insured, ten years experienced, and around 28 minutes from our Rochester base for quick turnarounds. The work is priced fairly and explained plainly, which is exactly what most people want when they’re letting a stranger into their home to touch the wiring.

How a job runs

From first contact to finished job, Ditton work is kept simple. Get in touch with the basics, get a fixed quote back quickly, and book a time that works for you. On site we do the job properly and leave it clean, explaining anything worth knowing as we go. EICR reports arrive as a PDF within 48 hours and can go straight to your agent or council. Remedials, if any, come as a clear separate quote, your call whether and when to proceed.

Credentials, insurance and how we work

Reassurance matters when someone’s working on your wiring, so for the record: CJA Electrical holds City & Guilds 2391, 2382 and 2365, carries £1 million public liability and £100,000 professional indemnity cover, and tests everything to BS 7671. Ten years on the tools across Kent means the local housing, from period homes to modern estates, is familiar territory, and that shows up as fewer surprises once a job is under way.

Our Ditton services

From our Rochester base, Ditton is around 28 minutes away. We cover the full range of domestic electrical work in the town:

Nearby

We also cover:

Frequently asked questions

How much does an electrician cost in Ditton?

It depends entirely on the job. Small work (an extra socket, a light fitting, fault-finding) is usually a short fixed-price visit. Larger work like a consumer unit change or an EICR is priced after a quick conversation about the property. Either way you get a fixed quote before anything starts, so there are no surprises on the invoice. Get in touch with the address and a few details for a same-day quote.

Do you cover Ditton, or just Rochester?

Ditton is firmly within the area we cover. CJA Electrical is around 28 minutes from our Rochester base. Most Ditton jobs are booked within the same week, and the surrounding Maidstone towns including Larkfield, Aylesford, Maidstone are covered too. Booked work and EICRs are always available; same-day emergencies depend on the diary and the distance on the day.

How quickly can you come out for an emergency in Ditton?

Same-day where the diary allows. Call or WhatsApp with what's happening and we'll triage it on the phone first. Sometimes it's something you can safely reset yourself, which saves you a callout. If a visit is needed, we'll give you an honest idea of timing and a price before setting off. Outside working hours it's best-effort rather than a guaranteed 24-hour service.

How much does an EICR cost in Ditton?

EICR cost depends on the size of the property and the number of circuits. Most three-bedroom Ditton homes are quoted as a fixed price after a short chat about the property; a photo of the consumer unit often helps. The written report follows within 48 hours of testing, and any remedial work is quoted separately so you can decide how to proceed.

Do I legally need an EICR on my Ditton rental?

Yes. Since June 2020, every privately rented home in England needs a satisfactory EICR at least every five years and at the start of any new tenancy. The certificate must be supplied to tenants and to Tonbridge and Malling Borough Council on request, and penalties for non-compliance run to £30,000. We supply the report in the standard format your agent or council will accept.

What does an EICR actually check?

An EICR is both a visual inspection and an electrical test. The consumer unit is opened and inspected, every accessible socket, switch and light fitting is checked, and every circuit gets dead and live testing: continuity, insulation resistance, polarity, earth fault loop, and RCD operation. The result is a written report with each observation coded against BS 7671.

What do C1, C2 and C3 mean on my report?

They're observation codes. C1 means immediate danger and needs sorting straight away. C2 means potentially dangerous and also fails the report. C3 is "improvement recommended" and does not fail it. A report is satisfactory with no C1 or C2 items; C3s alone still pass. We'll always explain in plain English what any code means for your Ditton property.

Get a quote

Send a quick message and you'll get a same-day reply during working hours. Skip straight to phone or WhatsApp if you prefer.

EICR detail (helps with the quote)

Or skip the form: Office 01634 907123 Mobile 07598 216512 WhatsApp info@cjaelectrical.co.uk